Reverse Circulation Drill Rig DP648

Reverse Circulation Drill Rig DP648
High performance Reverse Circulation (RC) exploration drill rig DP648-RC on platform. The drilling angle is 0-100 degree from horizontal, which is suitable according to most drilling requirements. Please note that below specifications can be adapted to your needs on request, for example, the must structure designed and can be build for drill pipe of 3 m (10'), 4.5 m (15') or 6 m (20').
DP series RC rigs are designed with the end user in mind. You will be able to benefit from its unique features optimized for high performance, efficiency and reliability in any operational environment. The platform configuration may feature a skid, shack, platform, outlander or any other suitable platform mount. The offered drilling platform is ready to be U-bolted to any vehicle chassis, including 6, 8 or 12 wheels trucks, tractors, outlanders, or can be custom fitted to specific truck chassis, as specified by the customer. Working temperatures: All our standard equipments are meant to operate CONSTANTLY at any temperature varying between - 45 to + 50 degrees Celsius (-49 F to 122F).

* Required Fields

Description

Details

FEATURES

 
Hydraulic power of 160 HP
 
Pullback capacity of 42000 lbs (19 050 kg)
 
Rotary drives with variable/reversible hydraulic motor and automatic constant rotation power control
 
Unique pipe handling system
 
Drilling angle is 0-100 degree from horizontal
 
Must structure designed and can be build for drill pipe of 3 m (10'), 4.5 m (15') or 6 m (20')
Additional Information

Additional Information

CHARACTERISTICS

Carrier : Platform
Drilling techniques : Reverse Circulation; DTH; Rotary
Drilling applications : Mineral exploration

Weight and Dimensions

Boom Length - 35 ft 8 in (10,31 m)
Width - 7 ft 4 in (2,26 m)
Height - 9 ft 6 in (2,90 m) boom down
Weight - 22,000 lb (9 979 Kg)(Dry & w/out drill pipes)

Undercarriage & Chassis

Custom made platform
The offered drilling platform is ready to be U-bolted to any vehicle chassis, including 6, 8 or 12 wheels trucks, tractors, outlanders, or can be custom fitted to specific truck chassis, as specified by the customer.

Power Unit

Cummins electronic diesel engine model QSB4.5-4cyl. (24 volts) turbocharged water cooled
160 hp – 119 kw @  2000rpm
Fuel consumption: “Operation” 6.8 L/hr <> 1.79 gal/hr
Fuel tank: 227 L <> 60 galls
Filtering system two stage (Primary @ security)
Emission certification: U.S. EPA Tier 3, EU Stage III
Integrated control safety panel, 24 volts

Hydraulic power unit & components

Pump drive: Two (2) variable displacement piston pumps, load sensing, pressure compensated, and one (1) gear pump dedicated for accessories.
Top drive: automatic constant rotation power control
Hydraulic tank capacity 227 L. <> 60 gall.
Hydraulic oil cooler
Filtration system (5 micron)
Integrated safety system
Body valves assembly for complete controls (Tram, positioning and drilling)
Auto-mechanical lubricator for the down the hole hammer
Hoses and fitting connection « seal lock »
Integrated safety system, over heat, low levels etc.
Integrated extra hydraulic power supply «HP»
*#1 connection: 5hp
*#2 connection: 5hp

Mast & Feed Assembly

Dump (0 to 100°: from the horizontal)
Mast movement "upwards-downwards" by means of a hydraulic cylinder, for fixing of a boring table on the ground for angled drilling
Heavy duty mast structure designed for drill pipe 3.00 m <> 10’
Drill Head travel length (Stroke: 7 m <> 23’)
Top drive mounting plate is equipped with urethane anti-wear slides
Pull down/back force «Traveling» 42 000 Lbs <> 186.8 KN
Hydraulic drilling table w/hydraulic break out
Additional hydraulic wrench
Hydraulic Swing hoist (Jib winch) «RC»

Remote control panel “Electric”

Aluminum remote control, ergonomic design for complete operation

Rotary Head “RC”

1s Torque capacity: 4751lb-ft <> 6431 Nm
Rotation speed: 0-250rpm
Automatic constant rotation power control
Floating spindle for RC, saving sub and inner tube

Break-out & clamps jaws

Hydraulic swing clamping retractable jaws
Swing torque 9,980daN <> 22,436lbf
Clamp force 26,049daN <> 58,560lbf
Hydraulic retractable slip plate. Clamps force 26,049daN <> 58,560lbf)
Hydraulic centralizer
Min-Max opening (60-222 mm <> 2.3” -8¾”)

Water Injection Pump

Model FMC A04
Double piston pump
Volume; 34 L/min <> 9 gal/min
Pressure: 38 bar <> 550 psig
Revolution speed: 500 rpm
Water tank stainless steel 454L<>120gall

Hole Depth Capacity**

1300 ft (400 m) with 4 inch RC drilling pipes
(Drill pipe 4’’(101.6 mm) diameter; Hole size- 5¾"(146mm); Hard Rock formation;
Compressor: 500Psi (3.447Mpa) / 1200Cfm (33.98 m3 /m))
* Subject to ground conditions, compressor or mud pump capabilities, type and a quality of drilling equipments used (pipes etc..) and driller skills.

Out-riggers

Heavy duty
Hydraulic
Two (2): Front out riggers c/w integrated security lock (Fixed)
Two (2): Rear out riggers c/w integrated security lock (Fixed)

Drilling Angle

0 to 100°  from the horizontal

Drill pipe length

10 ft (3 m) or 15 ft (4,5 m) or 6 m (20')
Pipe Rack Not On board

Optional Equipment

The RC sample splitter installed beneath the RC cyclone and used to collect a representative sample fraction energy
Reverse circulation sampling collection Cyclone
Rod handling and Rod Feeder to load and unload
Cummins engine 179kw<>240hp
Swing-extendable pipe loading Jib 544kg
Rigid-Flex mechanical sample collector
Radio remote
Air swivel
Blow back system
Automatic Lubricator assy (Included)
Mechanical thread greaser
Winter package “Engine–water tank”
Front blade
Panel control on swing arm
Pipe rack
Water tanks “Aluminum” 454 L.<>120 gall

Shipping

Overseas packaging: 40 ft container
Inland shipment: Flatbed
* Some of the features are optional
** Subject to ground conditions, compressor or water / mud pump capabilities, type and a quality of drilling equipments used and driller skills
Reviews

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.