Geothermal Drill Rig Genius-Drill

Geothermal Drill Rig Genius-Drill

Geothermal Drill Rig Genius-Drill GD530-SD has been specifically conceived with the end user in mind, to be rugged, good maneuverability, energy efficient and reliable to enhance field productivity.

* Required Fields

Description

Details

FEATURES

RTraction, Novamac proven heavy duty design already on operation on our Rock-Master RM615-A and B12A
 
Doosan compressor model VHP500. Rated 500cfm @ 200psi at 2100 rpm. Rated 600cfm @ 150psi at 2300 rpm.
 
Operator thermal Cab “FOPS” mounted on articulated swing arm for easy vision operation
 
Radio remote control for full operation inside the cab or anywhere around the drill.
 
Load-unload rod handling, simple and clear mechanical system, easy for maximum availability.
Additional Information

Additional Information

CHARACTERISTICS

Carrier : Tracks mounted
Drilling techniques : DTH, Rotary, Rotary
Drilling applications : Geothermal Overburden Drilling, water and geothermal wells, construction

Weight and Dimensions

Length……9.57m <> 31.41ft
Width……..3.00m <> 9.84ft
Height…….3.53m <> 11.58ft
Weight….approx. 20412kg <> 45000lbs (w/out pipe on board)

Undercarriage & Chassis

Tracks mounted steel shoes
Tracks mounted Heavy duty rubber pads (On request)
Track length: 3.48 m <> 137’’
Track shoes width: 500 mm <> 19.7”
Pressure applied brake system
Heavy duty link profile
Gradability 19° <> 35%
Ground clearance 380 mm <> 15”
(4) Heavy duty hydraulic out-riggers (2 front & 2 rear)
Travel speed: 4.4 km/h <> 2.6 mph

Power Unit

Cummins electronic diesel engine model QSX11-4cyl. (24 volts) turbocharged water cooled
Power 400hp – 297.8kw @ 1800rpm
Fuel consumption «Operation» 45 L/hr <> 11.89 gal/hr
Fuel tank 681 L. <> 180 galls
Filtering system two stage (Primary @ security)
Emission certification: U.S. EPA Tier 3, EU Stage III
Integrated control safety panel, 24 volts

Compressor

Heavy duty single stage rotary screw
Rated capacity: 500cfm <>14.2cu.m.
Pressure: 200psi <>13.8bar
Mechanical air load c/w silicone pad heather control (Cyl. & Receiver pressure regulator)
Controls: Pressure & temperature gauge, air filter maintenance indicator

Compressor Safety device

Discharge temperature
Receiver pressure
Inter stage pressure
low oil pressure
Minimum pressure valve
Pressure relieve valve

Hydraulic power unit & components

Pump drive: Two (2) variable displacement piston pumps, load sensing, pressure compensated, and one (1) gear pump dedicated for accessories.
 Hydraulic tank capacity 227 L. <> 60 gall.
Hydraulic oil cooler
Filtration system (5 micron)
Body valves assembly for complete controls (Tram, positioning and drilling)
Air loading actuator
Hold back “Flow & pressure” system control
Auto-pressure mechanical hammer lubricator (Capacity 22.7 L <> 6 gall)
Mechanical thread greaser (Option)
Winter heating system package (Option)
Hose and fittings type « seal lock »
Integrated safety system, over heat, low levels etc.

Mast & Feed Assembly

Dump (0 to 100° from the horizontal)
Specific heavy duty mast structure designed for pipe 6.00 m <> 20’
Mast extension: (40” pin #1) & (74” pin #2)
Feed system hoisting and pull-down power is provided by link- chain, hydraulic gear box controlled hydraulically for accurate trust
Pull down / Pull back force: (21000lbs <> 93.4kN)
Top drive mounting plate is equipped with urethane anti-wear slides
Cutting deflector /collector joint with “Flex-ridged system”
Jib hydraulic winch 544 kg <> 1 200 lbs

Remote control

Full “Radio Remote” for complete operation

Head EURODRILL model RH400

Torque capacity type motor 103: 2674lbf-ft <> 362daNm at 0-110rpm
Torque capacity type motor 103: 1336lbf-ft <> 181daNm at 0-220rpm
Max rotation speed: 0- 220 rpm
Working pressure: 3650psi <>250bar
Swivel passage: 2“ <> 50.8mm
Drive flange type
Floating spindle (Option)

Double Break-out & Clamps: hydraulic jaws

Hydraulic swing clamping retractable jaws (Torque 9,980daN <> 22,436lbf)
Hydraulic holding clamps retractable jaws (Force 26,049daN <> 58,560lbf)
Manual centralizer
Min-Max opening (60-222 mm <> 2.3” -8¾”)

Water Injection Pump

Model FMC L04
Double piston pump, Complete filtering system
Volume; 34 L/min <> 9 gal/min
Pressure: 38 bar <> 550 psig
Revolution speed: 900 rpm
Water tank stainless steel 454L<>120gall

Rod handling & Feeder

Mechanical rod handling pipe manipulator (6m x 20ft long)
On board pipe storage (Qty 33 pipes = 200m)

Out-riggers

Heavy duty
Hydraulic
Two (2): Front out riggers c/w integrated security lock (Fixed)
Two (2): Rear out riggers c/w integrated security lock (Fixed)

Noise less Insulated Cab

Rotary swing for better operation
Vibration isolated seat and seat belt
Sound insulation invironment
All funtion are controlled on radio remote
Windshield double wiper
Working light for extended hours

Optional Equipment

Mechanical thread grease
Winter heating system package
Floating spindle
Water tank Stainless steel
Operator thermal swing cab mounted

Shipping

Overseas packaging: 40 ft container
Inland shipment: Flatbed
* Some of the features are optional
** Subject to ground conditions, compressor or water / mud pump capabilities, type and a quality of drilling equipments used and driller skills
Reviews

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.